FlexBody, ArcBody, and PC Mutar for Digital Imaging and Film Photography 221
Figure 13-5 Depth-of-fi eld and sharpness range. With the aperture set at f/8 the lens produces
a specifi c amount of depth-of-fi eld (top). You can extend the range of sharpness at the same
aperture by tilting the image plane in relation to the lens plane (bottom).
Figure 13-6 Maximum sharpness range. The maximum sharpness range on the FlexBody or
ArcBody is obtained when lines extended from the lens plane and image plane meet at a
common point on a line extended from the subject plane.
To Next Page
Loading...
