71Connection
HBMQuantumX
If the firmware version number of your module is lower than the current number on the
Internet, an update is necessary:
• Download the latest software package from the HBM website (QuantumX firmware
downloader, QuantumX Assistant, etc.)
• Close all running HBM software, install the new software and start QuantumX Firmware
Updater
• Download the latest firmware from the HBM website and save it in the download directory
of the firmware updater (in most cases: C:\Programs\HBM\QuantumX Firmware
Update\Download)
• Click on the ”Find modules” symbol or press function key F4 (see chapter 2.1).
• Select the module
• Select the required version in the dropdown menu ”New firmware”
• Activate the modules whose firmware you want to update by checking the boxes in the
column ”Update” and then click on the ”OK” button.
• Click on the ”Start” button and wait until the update is complete (do not interrupt the
process/do not switch off the modules/do not interrupt the connection)
NOTE
You can update the firmware of the modules via FireWire, directly via Ethernet or via
the Ethernet connection of the Gateway CX27.
To Next Page
Loading...
