95Connection
HBMQuantumX
6.6 MX460 frequency measuring amplifier
You can connect up to four transducers to the frequency measuring amplifier MX460. The
transducers are connected via 15-pin D-SUB-15HD device connectors. All measuring
channels are electrically isolated von one another and from the mains. When using the
adjustable transducer excitation, electrical isolation from the supply voltage of the amplifier is
not required.
MX460 connectable transducers
Transducer type Connector sockets see page
Torque/rotary speed 1 ... 4 134
Frequecy mesurement, pulse counting 1 ... 4 from 133
Puls width, Pulse duration, Period duration 1 ... 4 133
Passive inductive rotary encoder 1 ... 4 140
Incremental encoders 5 ... 8 From 133
To Next Page
Loading...
