5 June 2020 CasTemp Wireless including CasTemp Superheat page II of VII
All instrument boards contain electronic components that can be damaged by electrostatic discharge.
These boards should only be handled by qualified personnel. The necessary safety precautions and
security guidelines must be observed during maintenance and service on the instrument.
Trademarks: All brand names and product names included in this manual are trademarks, registered
trademarks, or trade names of their respective holders.
Econ-O-CarbP
P, PosithermP
P, QuiK-CarbP
, CasTemp
®
and TapTipP
P are registered
trademarks of Heraeus Electro-Nite.
© 2015 Heraeus Electro-Nite
This manual is copyrighted by Heraeus Electro-Nite. No part of this document
may be reproduced, transmitted, transcribed, stored in any retrieval system, or
translated into any language by any means without the express written
permission of Heraeus Electro-Nite.
Heraeus Electro-Nite makes no warranties as to the contents of this
documentation and specifically any implied warranties of merchantability or
fitness for any particular purpose.
Heraeus Electro-Nite further reserves the right to alter the specification of the
product without obligation to notify any person or organisation of these
changes.
Improvements or instrument changes added after this document was printed
are to be found on one or more pages enclosed at the end of this manual.
We ask you to take note of these extra sheets.
To Next Page
Loading...
