Heraeus Electro-Nite CasTemp Wireless - SH Prediction Parameters Configuration; CasTip Parameters Adjustment

5 June 2020 CasTemp Wireless including CasTemp Superheat Page 34
5.2.3 SH Prediction Parameters
SH Prediction parameters are configurable values but should only be changed if advised to by your
local HEN rep. with the exception of Superheat overrun time.
Figure 39: SH Prediction Settings
Setting
Default
Comment
Superheat overrun
time on new heat
0
Recommended is 10 minutes to allow contents of tundish to be fully
exchanged.
5.2.4 CasTip Parameters
CasTip parameters can be adjusted in order to aid the function of the CasTip. However these should
only be changed when advised to by your local HEN rep. with the exception of Checkmate (see
section 5.2.5)