5 June 2020 CasTemp Wireless including CasTemp Superheat Page 1
1 Safety and Usage Notes
1.1 General
This manual provides the information required to use the CasTemp Wireless system. This comprises
a CasTemp wireless instrument and a QUBE
TM
CTW Wireless module. It is written for technically
qualified personnel such as engineers, programmers, or maintenance specialists who have been
specially trained and who have the specialised knowledge required in the field of instrumentation and
control.
This manual is an integral part of the instrument even if, for logistical reasons, it has to be ordered
separately. For the sake of clarity, not all details of all versions of the instrument are described, nor
can it cover all conceivable cases regarding installation, operation, and maintenance. If you require
further information or face special problems that have not been dealt with in sufficient detail in this
manual, contact Heraeus Electro-Nite.
We would also point out that the contents of this manual shall not become a part of, or modify, any
prior or existing agreement, commitment, or legal relationship. The Purchase Agreement contains the
complete and exclusive obligations of Heraeus Electro-Nite. Any statements contained in this manual
do not create new warranties or restrict the existing warranty.
1.2 Qualified Personnel
Only qualified personnel should be allowed to work on this instrument. Non-compliance with the
warnings contained in this manual or appearing on the instrument itself can result in severe personal
injury or damage to property. Qualified personnel includes:
• System planning and design engineers who are familiar with the safety concepts of automation
equipment.
• Operating personnel who have been trained to work with automation equipment and are
conversant with the content of the manual in as far as it is connected with the actual operation of
the instrument.
• Commissioning and service personnel who are trained to repair such automation equipment and
who are authorised to energise, de-energise, clear, ground, and tag circuits, equipment, and
systems in accordance with established safety practices.
1.3 Danger Notices
The notices and guidelines that follow are intended to ensure personal safety, as well as protecting
the instrument and connected equipment against damage.
The safety notices are warnings for protection against loss of life (yours or service personnel) or for
protection against damage to property and are highlighted in this manual by the terms and pictograms
defined here. The terms used in this manual and marked on the instrument itself have the following
significance:
Danger: Indicates that death, severe personal injury, or substantial property damage will result if
proper precautions are not taken.
Warning: Indicates that death, severe personal injury, or substantial property damage can result if
proper precautions are not taken.
Caution: Indicates that minor personal injury or property damage can result if proper precautions are
not taken.
Note: Indicates important information about the product, its operation, or a part of the manual to
which special attention is drawn.
Attention: Hints in this documentation to special safety-related guidelines, which equate to the safety
level of Caution and Note.
To Next Page
Loading...
