5 June 2020 CasTemp Wireless including CasTemp Superheat Page 43
Figure 48: new telegram composer
To create a new telegram, configure the name and the definition.
The name is the name given in the list of bindings; the definition is what is going to be in the data
output. Floating point is available on some outputs.
After the new telegram is created, the telegram will be added with the custom name to the list shown
in Figure 48 E.g. ‘Test Telegram’
The telegram definition is the data that has to be sent out. A number of predefined fields can be
selected from the “available results” field.
The fields that can be selected are listed in
To Next Page
Loading...
