Heraeus Electro-Nite CasTemp Wireless - Database Parameters Configuration; LAN 1 & 2 Network Parameters

5 June 2020 CasTemp Wireless including CasTemp Superheat Page 37
5.2.7 LAN 1 & 2 parameters
The network parameters can be viewed when selecting the network option (LAN 1 or LAN 2)
Figure 42: Network settings
The network parameters can only be modified when the DHCP box is unchecked as shown in Figure
43: Network settings with DHCP is unchecked (Not enabled).
Please note that the IP address should only be set once the physical connection is established.
Figure 43: Network settings with DHCP unchecked