DS-76xx-I2/xP/4S NVR UM
121
Character encoding format: currently, the Latin-1 format is available.
Overlay mode of the characters to display in scrolling or page mode.
Font size and font color.
Display time (sec) of the characters. The value ranges from 5 to 3600 s.
Timeout of POS event. The value ranges from 5 to 3600 s. When the device has not
received the POS message over the defined time, the transaction is finished.
5) In the Privacy Settings, set the POS privacy information to not display on the image, e.g., the
card number, or the user name, etc. The defined privacy information will be displayed in *** on
the image instead.
6) (Optional) Check the checkbox to enable the Overlay POS in Live View. When this feature is
enabled, the POS information can be overlain on the live view image.
Figure 15-7 Overlay Character Settings
You can adjust the size and position of textbox on the preview screen of POS settings interface by
dragging the frame.
7) Click Apply to activate the settings.
Configure POS Alarm
Purpose:
The POS event can trigger channels to start recording, or trigger full screen monitoring, audio warning,
notifying the surveillance center, sending e-mail and so on.
1) Go to Storage > Recording Schedule.
2) Set the arming schedule of the POS event.
3) Go to System > POS Settings.
4) On the POS adding or editing interface, click the Event Linkage tab.
5) Select the normal linkage actions: full screen monitoring, audio warning or send E-mail.
To Next Page
Loading...
