DS-76xx-I2/xP/4S NVR UM
148
a.m. on the first Sunday of November, with 60 minutes ahead.
4) Click the Apply button to save the settings.
Manage User Accounts
Purpose:
The
Administrator
user name is
admin
and the password is set when starting the device for the first
time. The
Administrator
has the permission to add and delete users, and configure user parameters.
Add a User
1) Go to System > User.
Figure 19-4 User Management Interface
2) Click Add to enter the operation permission interface.
3) Enter the admin password and click OK.
Figure 19-5 Add User
4) In the Add User interface, enter the information for new user, including User Name, Password,
Confirm (password), User Level (Operator/Guest) and User’s MAC Address.
To Next Page
Loading...
Need help?
General
