DS-76xx-I2/xP/4S NVR UM
140
To import a configuration file, select the file from the selected backup device and click
the Import button.
After the importing process is completed, you must reboot the device to activate the settings.
Import/Export Device Configuration Files
Purpose:
The device configuration files can be exported to a local device for backup; and the configuration files
of one device can be imported to multiple devices if they are to be configured with the same
parameters.
Connect a storage device to your device. To import a configuration file, the storage device must
contain the file.
Before You Start:
Connect a storage device to your device. To import a configuration file, the storage device must
contain the file.
1) Go to Maintenance > Import/Export
Figure 18-9 Import/Export Config File
2) Export or import the device configuration files.
Click Export to export configuration files to the selected local backup device.
To import a configuration file, select the file from the selected backup device and click
the Import button.
After having finished the import of configuration files, the device will reboot automatically.
Upgrade System
Purpose:
The firmware on your device can be upgraded by local backup device or remote FTP server.
To Next Page
Loading...
Need help?
General
