DS-76xx-I2/xP/4S NVR UM
36
Chapter 3 Camera Management
Add the IP Cameras
Add the IP Camera Manually
Purpose:
Before you can get live video or record the video files, you should add the network cameras to the
device connection list.
Before you start:
Ensure that the network connection is valid and correct, and the IP camera to add has already been
activated.
1) Click on the main menu bar to enter the Camera Management section.
2) Click the Custom Add tab on the title bar to enter the Add IP Camera interface.
Figure 3-1 Add IP Camera
3) Enter the IP address, protocol, management port, and other IP camera information to add.
4) Enter the login user name and password of the IP camera.
5) Click Add to finish adding the IP camera.
6) (Optional) Click Continue to Add to continue to add other IP cameras.
Add the Automatically Searched Online IP Cameras
1) On the Camera Management interface, click the Online Device panel to expand the Online Device
interface.
2) Select the automatically searched online devices.
To Next Page
Loading...
Need help?
General
