DS-76xx-I2/xP/4S NVR UM
144
3) Click Save to save the settings.
Manage ONVIF User Accounts
Purpose
For third-party camera connections to the device via ONVIF, you can enable ONVIF and manage user
accounts.
1) Go to System > System Service > ONVIF.
2) Check Enable ONVIF to enable ONVIF access management.
3) Click Add to enter the Add User interface.
Figure 18-15 Add User
4) Edit the user name, and enter the strong password.
5) Select the user level to Media User, Operator and Admin.
6) Click OK to save the settings.
Result:
The added user accounts have the permission to connect other devices to the device via ONVIF
protocol.
The ONVIF protocol is disabled by default.
Manage IP Camera Activation
When you activate the device for the first-time, you can set the IP camera activation password as well.
You can also manage the password to enhance security.
1) Go to System > System Service > IP Camera Activation.
2) Check the Change Password to enable the permission.
3) Enter the admin password of the device to obtain the permission.
To Next Page
Loading...
Need help?
General
