EasyManuals Logo

HIKVISION DS-7608NXI-I2/8P/4S User Manual

HIKVISION DS-7608NXI-I2/8P/4S
161 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #126 background imageLoading...
Page #126 background image
DS-76xx-I2/xP/4S NVR UM
126
3) Select DynDNS under DDNS Type.
PeanutHull and NO-IP are also available under DDNS Type, and required information should be entered
accordingly.
4) Enter Server Address for DynDNS (i.e. members.dyndns.org).
5) Under Device Domain Name, enter the domain name obtained from the DynDNS website.
6) Enter the User Name and Password registered in the DynDNS website.
Figure 16-7 DDNS Settings
7) Click Apply.
Configure PPPoE
If the device is connected to the Internet through PPPoE, you need to configure the user name and
password accordingly, as follows: System > Network > TCP/IP > PPPoE.
Contact your Internet service provider for details about the PPPoE service.
Configure NTP
Purpose
Connection to a network time protocol (NTP) server can be configured on your device to ensure the
accuracy of the system date and time.
1) Go to System > Network > TCP/IP > NTP.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HIKVISION DS-7608NXI-I2/8P/4S and is the answer not in the manual?

HIKVISION DS-7608NXI-I2/8P/4S Specifications

General IconGeneral
BrandHIKVISION
ModelDS-7608NXI-I2/8P/4S
CategoryNetwork Hardware
LanguageEnglish

Related product manuals