DS-76xx-I2/xP/4S NVR UM
66
2) Select the mode to by date, by week or by month.
3) Set the start and end date of the holiday.
4) Click OK.
4) Set the schedule for the holiday recording. Refer to
Chapter 7.4 Configure Recording Schedule
for details.
Configure Redundant Recording and Capture
Purpose:
Enabling redundant recording and capture, which means saving the record files and captured pictures
not only in the R/W HDD but also in the redundant HDD, will effectively enhance the data safety and
reliability.
You must set the storage mode to Group
before you set the HDD property to Redundancy. For detailed
information, please refer to
Chapter 7.2.1 Configure HDD Group
. There should be at least another HDD
which is in Read/Write status.
1) Go to Storage > Storage Device.
2) Select an HDD from the list and click to enter the Local HDD Settings interface.
3) Set the HDD property to Redundancy.
Figure 7-12 HDD Property-Redundancy
4) Go to Storage > Schedule Settings > Record Schedule/Capture Schedule.
5) Click Advanced to set the camera recording parameters.
To Next Page
Loading...
Need help?
General
