DS-76xx-I2/xP/4S NVR UM
56
Configure eSATA for Data Storage
When there is an external eSATA device connected to device, you can configure eSATA for the data
storage, and you can manage the eSATA in the device.
1) Click Storage > Advanced.
2) Select the eSATA type to Export or Record/Capture from the dropdown list of eSATA.
Export: use the eSATA for backup
Record/Capture: use the eSATA for record/capture. Refer to the following steps for
operating instructions
Figure 7-3 Set eSATA Mode
3) When the eSATA type is selected to Record/Capture, enter the storage device interface.
4) Edit the property of the selected eSATA, or initialize it is required.
Storage Mode
Configure HDD Group
Purpose:
Multiple HDDs can be managed in groups. Video from specified channels can be recorded onto a
particular HDD group through HDD settings.
1) Go to Storage> Storage Device.
2) Check the checkbox to select the HDD to set the group.
Figure 7-4 Storage Device
3) Click to enter the Local HDD Settings interface.
To Next Page
Loading...
Need help?
General
