DS-76xx-I2/xP/4S NVR UM
55
Result:
After having successfully added the NAS disk, return to the HDD Information menu. The added NetHDD
will be displayed in the list.
Adding IP SAN
1) Go to Storage > Storage Device.
2) Click Add to enter the Custom Add interface.
3) Select the NetHDD from the drop-down list.
4) Select the type to IP SAN.
5) Enter the NetHDD IP address in the text field.
6) Click Search to search the available IP SAN disks.
7) Select the IP SAN disk from the list shown below.
8) Click OK to complete the adding of the IP SAN disk.
Up to 1 IP SAN disk can be added.
Figure 7-2 Add IP SAN Disk
Result:
After successfully adding the IP SAN disk, return to the HDD Information menu. The added NetHDD will
be displayed in the list.
If the installed HDD or NetHDD is uninitialized, please select it and click the Init button for initialization.
To Next Page
Loading...
Need help?
General
