DS-76xx-I2/xP/4S NVR UM
28
Figure 2-2 Draw the Pattern
Connect at least four dots to draw the pattern. Each dot can be connected once only.
3) Draw the same pattern again to confirm it. When the two patterns match, the pattern is
configured successfully.
If the two patterns are different, you must set the pattern again.
Login to the Device
Log in via Unlock Pattern
Only the
admin
user has the permission to unlock the device.
Please configure the pattern first before unlocking. Please refer to
Chapter 2.3 Configure
Unlock Pattern for Login
.
1) Right click the mouse on the screen and select the menu to enter the interface.
To Next Page
Loading...
Need help?
General
