DS-76xx-I2/xP/4S NVR UM
124
Configuring Hik-Connect
Hik-Connect is a mobile phone application and service platform page (www.hik-connect.com) that
provides access and management for connected encoders, which provides convenient remote access
to the surveillance system.
Hik-Connect can be enabled via the SADP software, GUI and Web browser. GUI operation steps are
provided in this section.
1) Go to Configuration > Network > Advanced Settings > Platform Access to enter the
Hik-Connect Settings page.
Figure 16-2 Hik-Connect Settings
2) Check the Enable to activate the function. Then the Service Terms page pops up as below.
Figure 16-3 Service Terms
1) Create the verification code in the Verification Code text field.
2) Confirm the verification code.
3) Read Terms of Service and Privacy Policy before enabling the service.
4) Click OK to save the settings and return to the Hik-Connect page.
Figure 16-4 Hik-Connect Settings
To Next Page
Loading...
Need help?
General
