DS-76xx-I2/xP/4S NVR UM
70
Table 8-1 Create Array
3) Enter the array name.
4) Select RAID Level as RAID 0, RAID 1, RAID 5, RAID 6, or RAID 10, as required.
5) Select the physical disks that will constitute the array.
Table 8-2 Required Number of HDD
The number of HDD must be an even ranges from 4 to 16.
6) Click OK.
7) Optionally, the device will automatically initialize the created array. Go to Storage > RAID Setup >
Array view the information of created arrray.
Figure 8-3 Array List
Rebuild Array
Purpose
The status of array includes Functional, Degraded and Offline. To ensure the high security and reliability
To Next Page
Loading...
Need help?
General
