DS-76xx-I2/xP/4S NVR UM
54
Chapter 7 Storage
Storage Device Management
Install the HDD
Before startup of the device, install and connect the HDD to the device. Refer to the Quick Start Guide
for the installation instructions.
Add the Network Disk
You can add the allocated NAS or disk of IP SAN to device, and use it as network HDD. Up to 8 network
disks can be added.
Adding a NAS
1) Go to Storage > Storage Device.
2) Click Add to enter the Custom Add interface.
3) Select the NetHDD from the drop-down list.
4) Select the type to NAS.
5) Enter the NetHDD IP address in the text field.
6) Click Search to search the available NAS disks.
Figure 7-1 Add NAS Disk
7) Select the NAS disk from the list shown below, or you can manually enter the directory in the
text field of NetHDD Directory.
8) Click the OK to complete the adding of the NAS disk.
To Next Page
Loading...
Need help?
General
