DS-76xx-I2/xP/4S NVR UM
50
2) Click Apply to save the key points to the patrol.
6) (Optional) Click to edit the added key point.
Figure 6-10 Edit Key Point
7) (Optional) Select a key point and click to delete it.
8) (Optional) Click or to adjust the key point order.
9) Click Apply to save the settings of the patrol.
10) Repeat steps 3-9 to set more patrols.
Call a Patrol
Purpose:
Calling a patrol makes the PTZ to move according to the predefined patrol path.
1) Click on the quick settings toolbar of the PTZ camera live view. The PTZ control panel
displays on the right of the interface.
2) Click Patrol on the PTZ control panel.
Figure 6-11 Patrol Configuration
3) Select a patrol in the text field.
4) Click Call to call it.
5) (Optional) Click Stop to stop calling it.
Set a Pattern
Purpose:
Patterns can be set by recording the movement of the PTZ. You can call the pattern to make the PTZ
movement according to the predefined path.