DS-76xx-I2/xP/4S NVR UM
152
5) Click of non-admin user.
6) Enter Camera Configuration tab.
7) Select Camera Permission as Local Live View.
8) Select cameras to live view.
9) Click OK.
Edit the Admin User
The admin user account can modify its password and the unlock pattern.
1) Go to System > User.
2) Select the admin user from the list and click Modify.
Figure 19-9 Edit User (Admin)
3) Edit the admin user information as required, including the new admin password (strong
password is required) and MAC address.
4) Edit the unlock pattern for the admin user account.
1) Check the checkbox of Enable Unlock Pattern to enable the use of unlock
patternwhen logging in to the device.
2) Use the mouse to draw a pattern from the 9 dots on the screen, and release the
mouse when the pattern drawing is complete.
To Next Page
Loading...
Need help?
General
