DS-76xx-I2/xP/4S NVR UM
27
We highly recommend you create a strong password of your own choosing (Using a minimum of 8
characters, including at least three of the following categories: upper case letters, lower case letters,
numbers, and special characters) in order to increase the security of your product. We recommend
that you reset your password regularly, especially in high security systems. Resetting the password
monthly or weekly can better protect your product.
2) In the Create Channel Default Password text field, create a login password for IP camera(s)
connected to the device.
3) (Optional) Check Export GUID and Security Question Configuration.
Export GUID: export the GUID for future password resetting.
Security Question Configuration: configure the security questions which can be used for
resetting the password.
4) Click OK.
What to do next:
Once you have enabled the Export GUID, continue to export the GUID file to the USB flash
driver for future password resets.
Once you have enabled the Security Question Configuration, set security questions for
future password resets.
After the device is activated, safely keep the password. You can duplicate the password to the IP
cameras that are connected with default protocol.
Configure Unlock Pattern for Login
For the admin user, you can configure the unlock pattern for device login.
1) After the device is activated, you can enter the following interface to configure the device
unlock pattern.
2) Use the mouse to draw a pattern among the 9 dots on the screen. Release the mouse when the
pattern is done.
To Next Page
Loading...
Need help?
General
