DS-76xx-I2/xP/4S NVR UM
39
2) Select the camera to set the privacy mask to.
3) Click the Enable checkbox to enable this feature.
4) Use the mouse to draw a zone on the window. The zones will be marked with different frame
colors.
Figure 4-2 Privacy Mask Settings Interface
Up to 4 privacy masks zones can be configured and the size of each area can be adjusted.
Related Operation:
The configured privacy mask zones on the window can be cleared by clicking the corresponding Clear
Zone1-4 icons on the right side of the window, or click Clear All to clear all zones.
5) Click Apply to save the settings.
Configure the Video Parameters
Purpose:
You can customize the image parameters including the brightness, contrast, saturation for the live
view and recording effect.
1) Go to Camera > Display.
2) Select the camera from the drop-down list.
3) Adjust the slider or click on the up/down arrow to set the value of the brightness, contrast or
saturation.
4) Click Apply to save the settings.
To Next Page
Loading...
Need help?
General
