DS-76xx-I2/xP/4S NVR UM
45
Figure 5-5 Live View- Channel-Zero Encoding
5) Configure the Frame Rate, Max. Bitrate Mode and Max. Bitrate. The higher frame rate and bitrate
settings result in the higher requirement of bandwidth.
6) Click Apply.
Result:
You can view all of the channels in one screen using the CMS or web browser.
Use an Auxiliary Monitor
Certain Live View features are also available while in an Aux monitor. These features include:
Single Screen: switch to a full screen display of the selected camera. The camera can be
selected from a dropdown list.
Multi-screen: switch between different display layout options. Layout options can be
selected from a dropdown list.
Next Screen: when displaying less than the maximum number of cameras in Live View,
clicking this feature will switch to the next set of displays.
Playback: enter Playback mode.
PTZ Control: enter PTZ Control mode.
Main Monitor: enter Main operation mode.
In the live view mode of the main output monitor, the menu operation is not available while Aux output
mode is enabled.
To Next Page
Loading...
Need help?
General
