DS-76xx-I2/xP/4S NVR UM
129
Figure 16-10 E-mail Settings
2) Configure the following E-mail settings.
Enable Server Authentication: Check to enable the function if the SMTP server requires
user authentication and enter user name and password accordingly.
SMTP Server: The IP address of SMTP Server or host name (e.g., smtp.263xmail.com).
SMTP Port: The SMTP port. The default TCP/IP port used for SMTP is 25.
Enable SSL/TLS: Check to enable SSL/TLS if required by the SMTP server.
Sender: The name of the sender.
Sender's Address: Sender's Address.
Select Receivers: Select the receiver. Up to 3 receivers can be configured.
Receiver: The name of the receiver.
Receiver's Address: The E-mail address of user to be notified.
Enable Attached Picture: Check to enable the function if you want to send e-mail with
attached alarm images. The interval is the time between two adjacent alarm images.
3) Click Apply.
4) (Optional) Click Test to send a test e-mail.
To Next Page
Loading...
Need help?
General
