DS-76xx-I2/xP/4S NVR UM
150
Figure 19-7 User Permission Settings Interface
3) Set the user’s Local Configuration, Remote Configuration and Camera Configuration permissions.
Local Configuration
- Local Log Search: Search and view device log and system information.
- Local Parameters Settings: Configure parameters, restore factory default parameters and
import/export configuration files.
- Local Camera Management: Add, delete and edit IP cameras.
Local Advanced Operation: Operating HDD management (initialize HDD, set HDD property),
upgrade system firmware, clear I/O alarm output.
Local Shutdown Reboot: Shut down or reboot the device.
Remote Configuration
- Remote Log Search: Remotely view logs that are saved on the device.
- Remote Parameters Settings: Remotely configure parameters, restore factory default
parameters and import/export configuration files.
- Remote Camera Management: Remotely add, delete and edit IP cameras.
- Remote Serial Port Control: Configure settings for RS-232 and RS-485 ports.
- Remote Video Output Control: Send remote button control signals.
- Two-Way Audio: Perform two-way radio communication between the remote client and
device.
- Remote Alarm Control: Remotely arm (notify alarm and exception message to the remote
client) and control the alarm output.
- Remote Advanced Operation: Remotely operate HDD management (initialize HDD, set HDD
property), upgrade system firmware, clear I/O alarm output.
- Remote Shutdown/Reboot: Remotely shut down or reboot the device.
To Next Page
Loading...
Need help?
General
