DS-76xx-I2/xP/4S NVR UM
31
Figure 2-6 Network Settings
3) Click Next after you configured the network parameters, which takes you to the HDD
Management window.
Figure 2-7 HDD Management
4) To initialize the HDD, click the Init button. Initialization removes all the data saved in the HDD.
5) Click Next. You enter the Camera Setup interface to add the IP cameras.
Click Search to search the online IP Camera. Before adding the camera, make sure the
IP camera to be added is in active status.
Click the Add to add the camera.
If the camera is in inactive status, you can select the camera from the list and click Activate to
activate the cameras.
To Next Page
Loading...
Need help?
General
