DS-76xx-I2/xP/4S NVR UM
62
3) Check Enable Schedule.
4) Select a Record Type. The record type can be Continuous, Motion Detection, Alarm, Motion |
Alarm, Motion and Alarm, and Event.
Different recording types are configurable.
Continuous: scheduled recording.
Event: recording triggered by all event triggered alarm.
Motion: recording triggered by motion detection.
Alarm: recording triggered by alarm.
M/A: recording triggered by either motion detection or alarm.
M&A: recording triggered by motion detection and alarm.
POS Event: recording triggered by POS and alarm.
5) Select a day and click-and-drag the mouse on the time bar to set the record schedule.
Figure 7-9 Record Schedule
6) Repeat the above steps to schedule recording or capture for other days in the week.
7) Click Apply to save the settings.
To enable Motion, Alarm, M | A (motion or alarm), M & A (motion and alarm) and Event triggered recording
and capture, you must configure the motion detection settings, alarm input settings and other events
as well. Please refer to
Chapter 11 Event and Alarm Settings
and
Chapter 12 VCA Event Alarm for details
.
To Next Page
Loading...
Need help?
General
