You can customize the leave type (major leave type and minor
leave type) according to actual needs. You can also edit or delete
the leave type.
Steps
1.
Enter the Time & Aendance module.
2.
Click
Aendance Sengs Leave Type to enter the Leave Type
Sengs page.
3.
Click Add on the
le to add a major leave type.
4.
Oponal: Perform one of the following operaons for major
leave type.
Edit Move the cursor over the major leave type and
click to edit the major leave type.
Delete Select one major leave type and click Delete on the
le to delete the major leave type.
5.
Click Add on the right to add a minor leave type.
6.
Oponal: Perform one of the following operaons for minor
leave type.
Edit Move the cursor over the minor leave type and
click to edit the minor leave type.
Delete Select one or mulple major leave types and click
Delete on the right to delete the selected minor
leave type(s).
Synchronize Authencaon Record to Third-Party Database
The aendance data recorded in client soware can be used by
other system for calculaon or some other operaons. You can
enable
synchronizaon funcon to apply the authencaon
record from client soware to the third-party database
automacally.
Steps
1.
Enter Time &
Aendance module.
2.
Click
Aendance Sengs Third-Party Database .
3.
Set Apply to Database switch to on to enable synchronizaon
funcon.
4.
Set the required parameters of the third-party database,
including database type, server IP address, database name,
user name and password.
5.
Set table parameters of database according to the actual
conguraons.
1) Enter the table name of the third-party database.
2) Set the mapped table elds between the client soware and
the third-party database.
6.
Click
Connecon Test to test whether database can be
connected.
7.
Click Save to save the
sengs.
The aendance data will be wrien to the third-party
database.
Congure Break Time
81