Hioki RM3545 - Deleting Panel Data

6.4 Deleting Panel Data
124
Once a panel’s data is deleted, it cannot be restored (the delete operation cannot be
undone).
6.4 Deleting Panel Data
1
Open the Panel List Screen.
2
Select a panel number.
3
Verify that the confirmation message is shown and return to the Measurement
screen.
4
Return to the Measurement screen.
The Panel List Screen
appears.
2
Selection
1
Delete the panel.
Delete the panel and switch
to the previous screen (you
can also do this with the
key).
Cancel the operation and
return to the previous
screen. (you can also do
this with the key)
Return to the
Measurement screen.