Hioki RM3545 - Setting the Clock

7.6 Setting the Clock
133
7
To record and print the correct time when using statistical calculations (p. 111), the clock
needs to be set correctly. The time of printing is also output when printing statistical calcula-
tion results.
7.6 Setting the Clock
1
Open the Settings Screen.
2
Open the System Setting Screen.
3
Set the date and time.
4
Return to the Measurement screen.
The Settings screen
appears.
Switch the function menu
to P.2/3.
1
2
Move the cursor to the [SYS]
tab with the left and right cur-
sor keys.
Enter the last two digits of the year, and the
month, day, hour and minutes in that order.
Move the cursor to the setting you
wish to configure. Make the value
editable with the key.
2
Move the cursor to the digit you
wish to set with the left and right
cursor keys. Change the value
with the up and down cursor keys.
Change
values.
1
Move among
digits.
3
Accept
( Cancel)
Return to the
Measurement screen.