283
14
Calibrations
The calibration frequency varies depending on the status of the instrument or installation
environment. We recommend that the calibration frequency is determined in accordance
with the status of the instrument or installation environment and that you request that cali-
bration be performed periodically.
If damage is suspected, check the "Q&A (Frequently Asked Questions)" (p.284) section
before contact your authorized Hioki distributor or reseller.
Transporting
• Use the original packing materials when transporting the instrument, if possible.
• Pack the instrument so that it will not sustain damage during shipping, and include a
description of existing damage. We do not take any responsibility for damage incurred
during shipping.
Cleaning
To clean the instrument and optional equipment, wipe it gently with a soft cloth moistened
with water or mild detergent.
Wipe the LCD gently with a soft, dry cloth.
Maintenance and
Service
Chapter 14
IMPORTANT
Periodic calibration is necessary in order to ensure that the instrument provides cor-
rect measurement results of the specified accuracy.
IMPORTANT
Never use solvents such as benzene, alcohol, acetone, ether, ketones, thinners or
gasoline, as they can deform and discolor the case.
To Next Page
Loading...
Need help?
General
