Hioki RM3545 - Page 173

8.5 Zero Adjustment (When a Multiplexer Unit Has Been Installed)
165
8
Canceling zero-adjustment from the Measurement Setting screen
1
Open the Settings Screen.
2
Open the Measurement Setting Screen.
3
Select 0 ADJUST.
4
When the confirmation message is displayed, select [OK].
5
Return to the Measurement screen.
The Settings screen
appears.
Switch the function menu
to P.2/3.
1
2
Move the cursor to the
[MEAS] tab with the left and
right cursor keys.
2
Selection
1
Cancel zero-adjustment for
all channels.
Cancel zero-adjustment for
the selected channel.
Return to the
Measurement screen.