4.4 Stabilizing Measured Values (Averaging Function)
74
3
Enable the averaging function.
4
Set the number of averaging iterations.
5
Return to the Measurement screen.
Enables the averaging
function
Disables the averaging
function (default) (go to
step 5)
Selection
2
1
Move the cursor to the setting you
wish to configure. Make the value
editable with the key.
2
Move the cursor to the digit you
wish to set with the left and right
cursor keys. Change the value
with the up and down cursor keys.
Change
values.
1
Move among
digits.
Setting range: 2 to 100 times (default: 2 times)
3
Accept
( Cancel)
Return to the
Measurement screen.
To Next Page
Loading...
