6-24
6.2.24 Model-key Fault
6.2.25 Language-key Fault
Does the fault recur after disconnect
and reconnect the language key to
EZJ126 board C
It is necessary to change the language key.
Contact your local Hitachi sales office with
the unit serial number and model name.
Replace the EZJ126 board.
Do the system reset by rescue soft
Does the fault recur after
disconnect and reconnect the model
key to EZJ126 board CN15?
It is necessary to change the model key.
Contact your local Hitachi sales office with
the unit serial number and model name.
Replace the EZJ126 board.
Do the system reset by rescue soft