Hitachi IJ UX Service Manual

6-56
6.4.19
Ink Level Sensor Broken (2)
[Caution]
1. When this fault occurs, “Ink Low Warning 2” will be issued after one (1) hour passes.
This alarm is different from the prior and existing “Ink Low Warning”. Then, the printer
goes into Stop status with “Ink Low Fault 2” displayed.
2. Ink can be ejected by pressing the Startup button on the Home screen.
Ink Level Sensor
Broken (2)
Was the validation of Ink ID
performed at Ink cartridge
bottle replacement?
Validate the Ink ID and replace
the Ink cartridge bottle.
Resume
operation

Hitachi IJ UX Specifications

General

Brand	Hitachi
Model	IJ UX
Category	Printer
Language	English