Hitachi IJ UX - Page 275

6-57
6.4.20 Makeup Level Sensor Broken (2)
[Caution]
1. When this fault occurs, “Makeup Low Warning 2” is issued after one (1) hour passes.
This alarm is different from the prior and existing “Makeup Low Warning”. Then, the
printer goes into Stop status with “Makeup Low Fault 2” displayed.
2. Ink can be ejected by pressing the Startup button on the Home screen.
Makeup Level
Sensor Broken (2)
Was the validation of Makeup
ID performed at Makeup
cartridge bottle replacement?
Validate the Makeup ID and
replace the Makeup cartridge
bottle.
Resume
operation