Hitachi UX Twin Nozzle - Page 244

6-2
Subsection
Name
Remarks
6.3
Faults – Print-stop type
6.3.1a
(N1)Ink Drop Charge Too High
6.3.1b
(N2)Ink Drop Charge Too High
6.3.2
Barcode Short On Numbers
6.3.3
Shutdown Fault
6.3.4
Count Overflow
6.3.5
Print Overlap Fault
6.3.6
Print Head Cover Open
6.3.7
Improper Sensor Position
6.3.8
Target Sensor Fault
6.3.9
Target Spacing Too Close
6.3.10
Print Data Changeover In Progress S/M/V
6.3.11
Blank Print Item
6.3.12
Excessive Format Count
-
Communication Buffer Fault
Refer to the Technical Manual
“5.9. Communication Buffer”.
6.3.13
Internal Communication Error C/T/M
6.3.14
Invalid Data Change Timing
6.3.15
Invalid Count Data Change Timing
6.3.16
Invalid Print Start Timing
6.3.17
Ink Shelf Life Information
6.3.18
Makeup Shelf Life Information
6.3.19
Free layout printing failure
6.3.20
Print Data Changeover Error C/T/M
6.3.21
Ink Level Sensor Broken 1､3
6.3.22
Makeup Level Sensor Broken 1､4
6.3.23
Vision sensor Connection Error