Hitachi UX Twin Nozzle - Page 245

6-3
6.4
Warning conditions (printing continuously performed)
6.4.1
Excitation V-ref. Review, Excitation V-ref. Review 2
6.4.2
Viscosity Reading Instability
6.4.3
Viscosity Readings Out of Range
6.4.4
High Ink Viscosity
6.4.5
Low Ink Viscosity
6.4.6
Battery Low M
6.4.7
Calendar Content Inaccurate
-
External Communication Error nnn
Refer to the Technical
manual “5.7. Warning
message”.
6.4.8
Excitation V-ref. Char. Height Review
-
Ink Low Warning
Refer to “6.2.1”.
-
Makeup Low Warning
Refer to “6.2.9”.
6.4.9
Ink Shelf Life Exceeded
6.4.10
Ambient Temperature Too High/Too Low
6.4.11a
(N1)Ink Pressure High
6.4.11b
(N2)Ink Pressure High
6.4.12
Battery Low C
6.4.13a
(N1)Ink pressure Low
6.4.13b
(N2)Ink pressure Low
6.4.14
Product Speed Matching Error
-
Model-key Fault
Refer to “6.2.24”.
-
Language-key Fault
Refer to “6.2.25”.
6.4.15
Cooling Fan Warning
6.4.16a
(N1)Makeup Eject Pressure Low
6.4.16b
(N2)Makeup Eject Pressure Low
6.4.17
Inside Temperature Too High
6.4.18
Parts Life Expired
6.4.19
Ink Level Sensor Broken 2
6.4.20
Makeup Level Sensor Broken 2
‐
Ink Low Warning２
Refer to “6.4.19”.
‐
Makeup Low Warning２
Refer to “6.4.20”.