Hitachi UX Twin Nozzle - Page 70

2-48
5 Trace data (TRACE.TXT）
[Output Example of Trace data]
No.
Code
Sequence name
Date
Time
Information
1
001
Power turned on
time
2018/08/22
9:20:00
2
009
CM clock
[CCPU],2018/08/22,9:20:10,
[TCPU],2018/08/22,9:20:10
3
003
Select message
2018/08/22
9:25:35
0001, Normal (screen)
(1) Output contents of Trace data
- Code : Refer to the code in the table below.
- Sequence name : Refer to the sequence name in the table below.
- Date and Time : Refer to respective record data.
- Information : Refer to respective logging content.
[Code number and sequence name]
(2) Output example of the code/Description of the code
Code
Sequence name
Date
Time
Information
001
Power turned on time
2018/08/28
8:15:40
Record timing: When the power is turned on
Logging contents: Time of [CCPU]
Code
Sequence name
Date
Time
Information
002
Current time change
2018/08/28
8:15:40
, 2010/07/21,16:00:03,
[Calendar Time control], ,
Same as Current time,
[Clock system],24,24
Record timing: When Current time is changed on Date/Time setup screen
Logging contents: Settings of Before change/After change of [Current time], [Calendar time control]
and [Clock system]
Code
Sequence name
Code
Sequence name
001
Power turned on time
015
Ambient temp. upper lim.
002
Current time change
016
Excitation V-ref. (Max)
003
Select message
017
Unmatched language key
004
Clear Fault/warning log
018
Upgrade recovery
005
Set Viscosity
019
Time of preparing for printing
006
Excitation V-ref.
020
Reserved
007
Serial number change
021
Ink Drop Charge Rule
008
Unmatched model key
022
Reserved
009
CM clock
023
Print Overlap Fault Check
010
Restore
024
Alarm display
011
Ink shelf life
025
The Radio Law is approved
012
Input LotNo.
026
Tag reading of cartridge is
approved
013
Upgrade-key is short
027
Reserved
014
Reserved