Hitachi UX Twin Nozzle Service Manual

2-51
Code
Sequence name
Date
Time
Information
013
Upgrade-key is short
2018/01/28
8:15:40
[found],2018/01/28,13:00:00,
[key],01, [step],07
Record timing: When it is judged as Upgrade key is short.
Logging contents: 1. The date and time when the discrepancy was first [found]
2. [key] The number of upgrade keys which are inserted at present
3. [step] The number of steps required for the upgrade setup
(For management purpose, the number of steps +5 is recorded.)
Example: [step] 7 means 2 steps were set on the upgrade setup screen.
Code
Sequence name
Date
Time
Information
015
Ambient temp. upper lim.
2018/08/28
8:15:40
35, , 40
Record timing: When Ambient temperature upper limit is changed on System Environment setup
screen
Logging contents: Settings of Before change/After change of Ambient temperature limit value
Code
Sequence name
Date
Time
Information
016
Excitation V-ref. (Max)
2018/08/28
8:15:40
19, , 27
Record timing: When Excitation V-ref. (Max) is changed on System Environment setup screen
Logging contents: Settings of Before change/After change of Excitation V-ref. (Max)
Code
Sequence name
Date
Time
Information
017
Unmatched language
key
2018/08/28
8:15:40
[found],2018/08/28,00:00:00,
[EZJ128],00000000,
[EZJ121B],2147483647,J
Record timing: When Unmatched language key is detected
Logging contents: 1. [found] Initial occurrence date of mismatch
2. Serial numbers of [EZJ128] and [EZJ121B] (Board of Language key)
3. [J] Japanese can be set, [W] Japanese can NOT be set
Code
Sequence name
Date
Time
Information
018
Time of preparing for
print
2018/08/28
8:15:40
[found], 2018/08/28,13:00:00,
[key],01,[step],07
Record timing: When Upgrade recovery is detected
Logging contents: 1. [found] Initial occurrence date of mismatch
2. [key] The number of upgrade keys installed at the moment
3. [step] The number of steps required for the upgrade setup.
(For management purpose, value of number of steps +5 is recorded.)
Example: [step] 7 means 2 steps were set on the upgrade setup screen.
Code
Sequence name
Date
Time
Information
019
Time of preparing for
printing
2018/08/28
8:15:40
Short, , Standard
Record timing: When Time of preparing for printing was changed on the second screen of Print
specification screen
Logging contents: Settings of Before change/After change of [Time of preparing for printing]
Code
Sequence name
Date
Time
Information
021
Ink Drop Charge Rule
2018/08/28
8:15:40
Standard
(Single scan/Interlaced) 
Mixed Single scan and
Interlaced
Record timing: When setting of Ink Drop Charge Rule was changed on the third screen of Print
specification screen
Logging contents: Settings of Before change/After change of [Ink Drop Charge Rule]
Code
Sequence name
Date
Time
Information
023
Print Overlap Fault
Check
2018/08/28
8:15:40
Disable, , Enable
Record timing: When setting of Print Overlap Fault Check was changed on User environment setup
screen

Hitachi UX Twin Nozzle Specifications

General

Brand	Hitachi
Model	UX Twin Nozzle
Category	Printer
Language	English