Hitachi UX Twin Nozzle Service Manual

2-52
Logging contents: Settings of Before change/After change of [Print Overlap Fault Check]
Code
Sequence name
Date
Time
Information
024
Alarm display
2018/08/28
8:15:40
Disable, , Enable
Record timing: When setting of Alarm display was changed on Periodic replacement parts
management screen
Logging contents: Settings of Before change/After change of [Alarm display]
Code
Sequence name
Date
Time
Information
025
The Radio Law is
approved
2018/08/28
8:15:40
No, , Yes
Record timing: When setting of "The Radio Law is approved" was changed on System environment
setup screen
Logging contents: Settings of Before change/After change of [The Radio Law is approved]
Code
Sequence name
Date
Time
Information
026
Tag reading of cartridge
is approved
2018/08/28
8:15:40
No, , Yes
Record timing: When the setting of "Tag reading of cartridge is approved" was changed on
System environment setup screen.
Logging contents: Settings of Before change/After change of [The reading of cartridge is approved]

Hitachi UX Twin Nozzle Specifications

General

Brand	Hitachi
Model	UX Twin Nozzle
Category	Printer
Language	English