HYDRAULIC BRAKE
15-22
Coat the master piston and piston cups with clean
brake fluid.
Install the spring onto the piston end.
Install the master piston with the spring into the
master cylinder.
Make sure the snap
ring is firmly seated
in the groove.
Install the snap ring into the groove in the master
cylinder.
Apply silicone grease inside the boot.
Install the boot into the master cylinder and the pis-
ton groove.
Apply silicone grease to the brake lever contacting
surface of the master piston.
Do not allow the
piston cup lips to
turn inside out.
MASTER PISTON
MASTER CYLINDER
SPRING
TOOL:
Snap ring pliers 07914-SA50001
Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys.
email: info@motomatrix.co.uk
To Next Page
