EasyManuals Logo

Honeywell Farenhyt Series Installation & Operation Manual

Honeywell Farenhyt Series
152 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #101 background imageLoading...
Page #101 background image
IFP-75/IFP-75HV Installation/Operation Manual — P/N LS10147-001SK-E:D 06/25/2021 101
System Options Programming
Phone Line Gains
1. Enter the Installer Code. The panel will automatically access the Main Menu.
2. Select 7 to access the Panel Programming.
3. Select 5 to access the System Options.
4. From the next Menu, select 1 to access the Communication Options.
5. Select 5 to access the Phone Line Gains.
6. The available options are listed as follows:
Dialing: Low, *High (default), Normal
Reporting: *Low (default), High, Normal).
l
Figure 9.10 Phone Line Gains
9.6.2 Daytime/Nighttime Sensitivity
If you need to change the time that sensitivity levels take effect (that is, the time that “Day” and “Night” begin), follow these steps.
1. Enter the Installer Code.
2. Select 7 to access the Program Menu.
3. Select 5 to access the System Options.
4. From the System Options Menu, select 2 for Day/Night Sense.
A screen similar to the one shown in Figure 9.11, “Changing Day/Night Sensitivity Time” will display.
Figure 9.11 Changing Day/Night Sensitivity Time
9.6.3 Holiday Days
Up to 18 dates can be designated as holidays. When day/night sensitivity is enabled, all photoelectric smoke detectors in the system will use
night sensitivity for the entire day on days designated as holidays (see Section “Holiday Days” on page 101).
To add or change a holiday, follow these steps.
1. Enter the Installer Code.
2. Select 7 to access the Program Menu.
3. Select 5 to access the System Options.
4. Select 3 to select Holiday Days.
5. Select the Holiday schedules you want to edit (1- holidays 1 - 9, 2- holidays 10 - 18).
Figure 9.12 Edit Holidays Screen
6. Enter the month of the Holiday, then press ENTER.
7. Enter the day of the month for the Holiday, then press ENTER.
8. Repeat Steps 6 and 7 to add any remaining Holidays you want to program.
NOTE: For most installations, Holiday programming will need to be performed each year to ensure correct dates.
Pre-programmed
Holidays
Programmable
Holiday locations

Table of Contents

Other manuals for Honeywell Farenhyt Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Honeywell Farenhyt Series and is the answer not in the manual?

Honeywell Farenhyt Series Specifications

General IconGeneral
BrandHoneywell
ModelFarenhyt Series
CategoryControl Panel
LanguageEnglish

Related product manuals