86 IFP-75/IFP-75HV Installation/Operation Manual — P/N LS10147-001SK-E:D 06/25/2021
Programming Overview Programming Menu Quick Reference
System
Options
con’t
Communication
Options
Auto Time Test
Set the Hour
*02:00AM
Section 9.6.1
Set the Minutes
Select AM/PM
Enter Interval 24 hrs,12 hrs, *6 hrs, 4 hrs
Phone Lines
For each phone line (1 & 2) select:
Dialing Prefix Up to 9 digits *none
# of Answer Rings Range: 00-15 *06
Select Dialing Option
TT *TT
TT/PL
PULSE
Rotary Pulse Format
U = 60/40 *U
E = 66/34
Dial Tone Disabled
Y or N *N
Monitor Line
Y or N *N
Answering Machine Bypass Y or N
*N
Phone Line Unused
Y or N *N
Edit Ethernet
IP Address
Subn Mask
SubNet
Default Gateway
DHCP Enable
AlarmNet Timers
Ethernet Supervise
75 sec, 90 Sec, 3 min,
5 min, 1 hr, 24 hrs,
30 days, None
*5 Minutes
Cellular Supervise 24Hrs, 30 days, none *24 Hours
Old Alarm Time
10 min, 15 min,
30 Minutes, 1 hr, 2 hrs,
4 hrs, 8 hrs, 12 hrs,
24hrs, none
*30 Minutes
Phone Line Gains
Dialing
High
*HighLow
Normal
Reporting
Low
*LowNormal
High
Daytime/Nighttime
Sensitivity
Enable/Disable Yes *No Section 9.6.2
No
Day Start Enter time *6:00AM
Night Start Enter time *6:00PM
Days of the Week Select days *-MTWTF-
Holiday Days
Holidays 1 to 18 Enter dates *01/01, 07/04,
12/24, 12/25
Section 9.6.3
Menu Options/Defaults Comments
Table 8.4 Programming Quick Reference List (Continued)
To Next Page
Loading...
