Honeywell HH490 - Page 188

174 HH490 User Guide
Selection
Setting
* Indicates default
Serial Command #
Indicates a numeric entry
Page
User-Specified Range 0 - 30,000 ms DLYRRD##### 34
2D Reread Delay *2D Reread Delay Off DLY2RR0 34
Short (1000ms) DLY2RR1000 34
Medium (2000ms) DLY2RR2000 34
Long (3000ms) DLY2RR3000 34
Extra Long (4000ms) DLY2RR4000 34
Character Activation Mode *Off HSTCEN0 35
On HSTCEN1 35
Activation Character (Range 0- 255) *12
[DC2]
HSTACH### 35
Do Not End Character Activation After
Good Read
HSTCGD0 35
End Character Activation After Good
Read
HSTCGD1 35
Character Activation Timeout (Range 1 -
300,000) *30,000 ms
HSTCDT###### 36
Character Deactivation Mode *Off HSTDEN0 36
On HSTDEN1 36
Deactivation Character (Range 0- 255)
*14 [DC4]
HSTDCH### 36
Illumination Lights *Lights On SCNLED1 36
Lights Off SCNLED0 36
Aimer Delay 1 millisecond SCNDLY1 37
250 milliseconds SCNDLY250 37
500 milliseconds SCNDLY500 37
*Off (no delay) SCNDLY0 37
User-Specified Aimer Delay Range 0 - 4,000 ms SCNDLY#### 37
Aimer Mode Off SCNAIM0 37
*On SCNAIM3 37
Single Code Centering Single Code Centering DECWIN1;DECTOP49;DECBO
T 51;DECRGT51;DECLFT49
38
Centering Window Centering On DECWIN1 39
*Centering Off DECWIN0 39
Left of Centering Window (*40%) DECLFT### 39
Right of Centering Window (*60%) DECRGT### 39
Top of Centering Window (*40%) DECTOP### 39
Bottom of Centering Window (*60%) DECBOT### 39
Preferred Symbology On PRFENA1 40
*Off PRFENA0 40