Honeywell HH490 - Security Checklist; Infection by Malicious Software Agents

176 HH490 User Guide
Selection
Setting
* Indicates default
Serial Command #
Indicates a numeric entry
Page
Intercharacter Delay Range 0 - 5000 (5ms increments) DLYCHR#### 57
User Specified
Intercharacter Delay
Delay Length
0 - 5000 (5ms increments)
DLYCRX#### 57
Character to Trigger Delay DLY_XX## 57
Interfunction Delay Range 0 - 5000 (5ms increments) DLYFNC#### 58
Intermessage Delay Range 0 - 5000 (5ms increments) DLYMSG#### 58
Data Formatter Selections
Data Format Editor *Default Data Format (None) DFMDF3 60
Show Data Format Settings DFMBK3? 60
Enter Data Format DFMBK3## 61
Clear One Data Format DFMCL3 62
Clear All Data Formats DFMCA3 62
Data Formatter Data Formatter Off DFM_EN0 77
*Data Formatter On, Not Required, Keep
Prefix/Suffix
DFM_EN1 78
Data Format Required, Keep Prefix/Suffix DFM_EN2 78
Data Formatter On, Not Required, Drop
Prefix/Suffix
DFM_EN3 78
Data Format Required, Drop Prefix/Suffix DFM_EN4 78
Data Format Non-Match Error
Tone
*Data Format Non-Match Error Tone On DFMDEC0 78
Data Format Non-Match Error Tone Off DFMDEC1 78
Primary/Alternate Data Formats Primary Data Format ALTFNM0 79
Data Format 1 ALTFNM1 79
Data Format 2 ALTFNM2 79
Data Format 3 ALTFNM3 79
Single Scan Data Format Change Single Scan-Primary Data Format VSAF_0 79
Single Scan-Data Format 1 VSAF_1 79
Single Scan-Data Format 2 VSAF_2 80
Single Scan-Data Format 3 VSAF_3 80
Symbologies
All Symbologies All Symbologies Off ALLENA0 82
Codabar Default All Codabar Settings CBRDFT 82
Off CBRENA0 83
*On CBRENA1 82
Codabar Start/Stop Char. *Don’t Transmit CBRSSX0 83
Transmit CBRSSX1 83
Codabar Check Char. *No Check Char. CBRCK20 83
Validate, But Don’t Transmit CBRCK21 83
Validate, and Transmit CBRCK22 84