Honeywell HH490 - Troubleshoot a Corded Scanner

186 HH490 User Guide
Selection
Setting
* Indicates default
Serial Command #
Indicates a numeric entry
Page
Barcode, and Postnet with B and B’
Fields On
Planet Code Check Digit Transmit PLNCKX1 140
*Don’t Transmit PLNCKX0 140
Postnet Check Digit Transmit NETCKX1 140
*Don’t Transmit NETCKX0 140
Australian Post Interpretation *Bar Output AUSINT0 141
Numeric N Table AUSINT1 141
Alphanumeric C Table AUSINT2 141
Combination N and C Tables AUSINT3 141
Postal Codes - Linear
China Post (Hong Kong 2 of 5) Default All China Post (Hong Kong 2 of 5)
Settings
CPCDFT 141
*Off CPCENA0 142
On CPCENA1 142
China Post (Hong Kong 2 of 5)
Msg. Length
Minimum (2 - 80) *4 CPCMIN## 142
Maximum (2 - 80) *80 CPCMAX## 142
Korea Post Default All Korea Post Settings KPCDFT 142
*Off KPCENA0 142
On KPCENA1 142
Korea Post Msg. Length Minimum (2 - 80) *4 KPCMIN## 143
Maximum (2 - 80) *48 KPCMAX## 143
Korea Post Check Digit Transmit Check Digit KPCCHK1 143
*Don’t Transmit Check Digit KPCCHK0 143
Imaging Default Commands
Image Snap Default all Imaging Commands IMGDFT
145 -
148
Imaging Style - Decoding SNPSTY0
*Imaging Style - Photo SNPSTY1
Imaging Style - Manual SNPSTY2
Beeper On SNPBEP1
*Beeper Off SNPBEP0
*Wait for Trigger Off SNPTRG0
Wait for Trigger On SNPTRG1
*LED State - Off SNPLED0
LED State - On SNPLED1
Exposure (1-7874 microseconds) *7874 SNPEXP
Gain - None SNPGAN1
*Gain - Medium SNPGAN2
Gain - Heavy SNPGAN4